Our low monthly maintenance plan

Security Camera

  1. We have monthly or annual maintenance Inspections. Equipment and programming adjustments during inspection. Annual assessment of your business security requirements
  2. We guarantee on fixed price for the term of the agreement signed.
  3. We will carry out on site or remotely for configuration management, the Service engineer will also note down any deficiencies in the system and recommend work required to maintain, full, trouble free operation.
  4. We will use A secure web address to access your surveillance system remotely this will be done only during the short maintenance period.
  5. We will Check whether you or authorized personal have experienced any problems with the system.
  6. We will Carry out a visual inspection of all major components this will be including cable and connections where accessible for signs of deterioration or damage we will note down where a pieceneeds to be changed.
  7. We will check to see if Cameras are well connected and are configured for maximum and optimal coverage and also fix the cameras angles.
  8. We will examine supporting brackets and towers for signs of corrosion and damage due to bad weather.
  9. We will check that field of view is correct if not adjust it.
  10. We will check that all camera bracket fittings and clamping bolts are tight if not we will fix it.
  11. We will check that lenses are correctly focused and clean it if dirty.
  12. We will check operation of auto-iris lenses as appropriate.
  13. We will clean housing windows as necessary.
  14. We will check condition of pan / tilt unit, adjusting position of end stops and presets where applicable.
  15. We will check operation of infrared units.
  16. We will check physical condition and cable connections on the monitors and cameras.
  17. We will check operation of controls and adjust for best picture if needed.
  18. Wiring is well shielded and protected. Visual inspection of all major components this will be including cabling and connections for signs of deterioration or damage and rectify as necessary.
  19. We will check physical condition and cable connections.
  20. We will check operation of switchers and multiplex controllers including external alarm interfaces when fitted.
  21. We will check time / date settings and adjust if necessary.
  22. DVR system monitoring checks for system errors, video loss, network connection failure, and other system alerts these are important for smooth operations.
  23. DVRs are well connected and configured for optimal recording experience. Configure motion based or continuous recording options. Data is recorded and stacked so that new data is never overwritten.
  24. We will check hours run indicator and recommend for removal for service as appropriate.
  25. We will check condition and operation controls as necessary.
  26. We will check time / date settings and adjust accordingly

 

Computer Network

  • We will check all ethernet connectionon all computers that are connected to the network

  • We will check all computers for any issue with hardware or software.

  • We will check all equipments that are in server room if there is any problem.

  • We will check all switches, modems, routers to see if any problem are there.

  • We will check all keystone jacks that are in the wall to see if any problem occurs.

  • We will run a test on each of the computers to see if any unfamiliar issues such as virus, trojan, malware etc...

  • We will setup new computers to be connected to the network.

  • We will replace any hardware that needs to be done on a old or new computers.

  • We will run a complete diagnostic on all computers.

  • we have many more services give us a call.